Conviron GEN1000-GE, Руководство оператора

Страница: 39 / 54

Maintenance
November 8 2019 | 291180-ENG R00 31
To replace a fluorescent or an LED lamp:
1. Unlock the tube by rotating it one quarter turn and then carefully remove the used
lamp.
2. Install the new lamp by carefully inserting it into the receptacle and secure it in place
by rotating it one quarter turn.
3. Dispose of the used lamp(s) following local requirements, or contact the local
authorities for proper disposal procedures.
To re-install the lamps:
1. Slide the plastic cover into the tube, ensuring that the cover does not twist during
insertion.
2. Slide the fixture into the tube with the bulb facing the plastic cover.
Figure 6-6 Slide the Lamp Fixture Into the Tube
3. Align the slots on the bottom end cap with the fixture (Figure 6-7), and press the end
cap into the tube (Figure 6-8).
4. Tighten the bottom end cap screws (Figure 6-9).
Figure 6-7 Align the Slots Figure 6-8 Press On the
Caps
Figure 6-9 Tighten the
Screws