Conviron GEN1000-GE, Руководство оператора

Страница: 23 / 54

Installation
November 8 2019 | 291180-ENG R00 15
3. Install a wire shelf on top of the shelf brackets. Be careful not to scratch the painted
white finish (Figure 3-7).
Figure 3-7 Shelf Installed onto Support Bracket
4. Repeat steps 1 through 3 for the remaining shelf support brackets and shelves.
To install the optional seedling tray:
Slide the seedling tray over the top of the wire shelf (Figure 3-8).
Figure 3-8 Seedling Tray
To remove a wire shelf:
1. Lift the shelf up away from the shelf support bracket.
2. Remove it from the chamber.
To remove a wire shelf support bracket:
1. Tilt the support bracket upwards to remove the bottom tab from the pilaster.
2. Continue tilting the support bracket upwards to unhook the top of the clip from the
pilaster.