9.
NOTE 1:
To turn off the heater, press the ON / Off key (f). The power indicator Rep.
e is off.
NOTE 2:
Once the Comfort temperature has been set, DO NOT TOuCh the thermostat
temperature knob (A), act only on the On / Off (f). when you need more heat (at the
time of the shower, bath, ...) do not change your Comfort temperature setting, use the
"TuRbO" mode.
NOTE 3:
when the unit is heating, the heating indicator (C) is on.
TImER - «TURBO» mODE
- for immediate supply of heat or a quicker drying, it is possible to use
- the timer function.
- Put the unit on (see above) before performing this operation.
- The timer function makes the heater operate at full power on «Turbo» mode for an
adjustable duration (from 15 to 120 minutes).
- To do this, select the desired operating time by turning the Timer knob (D), then press
the same button to start the "Turbo" mode,
- indicator "b" and "C" are on.
- To stop the timer function press again the "Ok" button.
- To reduce your consumption, the device regulates the "Turbo" mode following the
room conditions and the use of the heater (less or more towels). In this case, the heat
indicator (C) flashes.
- At the end of the timer duration, the device will return to its original operation (controlled
heating by the thermostat).
