7.
Heater Air Inlet:
- Do not obstruct.
- Do not install electrical junction box in this area.
2
13/16
"
(71 mm)
5
3/16"
(132 mm)
41
7/16
"
(1052,5 mm)
Heater : 50
1/4
" (1277 mm) x 15
3/4
" (400 mm)
9
7/16
"
(240 mm)
3
3/8
"
(86 mm)
7
7/8
"
(200 mm)
4"
(100mm)
11
13/16
"
(300 mm)
11
13/16
"
(300 mm)
15
3/16
"
(386 mm)
4"
(100 mm)
Fig. 2
Rep.A
6"
(150mm)
27"
(68,6 mm)
Cable entrance
4
installation and Mounting
Wall bracket installation:
- Remove the wall bracket from the
heater by pushing ithe 2 clipping tabs
(Rep. A).
- Place the wall bracket on the wall
and mark the 4 mounting holes in
accordance with the dimensions
shown in figure 2.
- fix the wall bracket with at least 4
screws (Ø 5.5 max) ensuring the
bracket is in the right orientation and at
the correct installation height.
NOTA 1 :
be sure to respect the distances
reported in figure 2.
NOTA 2 :
The device must be fixed to
its support, the use of adhesif to fix the
support or the device is forbidden.
Heater installation:
- TO MOuNT The uNIT ON The wAll
bRACkeT, eNgAge The lOweR legs
INTO The slOTs AT The bOTTOM AND
bACk Of The heATeR. ThIs OPeRATION
Is fACIlITATeD bY PReseNTINg The
uNIT slIghTlY TIlTeD fORwARD.
- ClIP The TOP Of The wAll bRACkeT.
