9.
- The "Timer" function
This function allows an immediate and additionnal 800 w of heat during a time determinated
period (from 5 to 90 minutes). so you are using your device in its full power unregulated,
ie : 1400 w.
- To use the «Timer » function
Pressing the « » button triggers the «Timer » function for a period of 15 min (default).
The red indicator lights. successive presses on «-» and «+» allow to modify the duration
between 5 and 90 min in steps of 5 min. hold the « » key for 3 seconds to select the
new default duration.
-
To stop the « Timer » function
The «Timer » function stops automatically once the time has elapsed, or by
pressing on the « » to stop the function (the red indicator turns off, the display
shows the desired temperature).
-
To lock the controls
This function locks any manipulation of the thermostat to prevent tampering, particularly
by children. Only the «Timer » function can be activated.
Press simultaneously for 3 seconds the « » and «+» keys to activate this function. The
display shows « » indicating the control panel is locked.
-
To unlock the controls
To unlock the control panel, press again simultaneously for 3 seconds the « » and «+»
keys. The lock symbol « » is no longer displayed.
-
To activate and set the « Auto Cycle 24H »
You enter every day at the same time in your bathroom and you like to have this feeling
of warmth. The « Auto Cycle 24h » is handled automatically by setting the «Chrono»
time.
-
To set the « Chrono » time
The « Chrono » time is the time at which you want the bathroom to be warm every day.
Press on the « 24h » key. The light indicator stays on and the function is activated.
To disable it, use the same procedure (pressing the « 24h » key).
If no « Chrono » time is set when the command is activated, the indicator flashes, indicating
that the « Auto Cycle 24h » cannot be activated.
To set the « Chrono » time, press 3 seconds on the « 24h » key. This causes a slow
blink of the « 24h » light indicator for 3 seconds, thus validating the actual time as the «
Chrono » time.
If the « Auto Cycle 24h » is activated, the device will do a preheat of 15 minutes on
regulated power, then another 15 minutes on full power before the « Chrono » time. At
this time, it activates the timer for the duration saved by default.
IN CAse Of POweR fAILuRe, ALL seTTINgs wILL be LOsT.
Содержание adagio 7640
Страница 2: ...2...
