CONVECTAIR adagio 7640, Инструкция по установке и эксплуатации

Страница: 6 / 12

6.
3
installation and Mounting
Wall bracket installation:
- Remove the wall bracket from the
heater by pushing the 2 clipping tabs
(Rep. 4).
- Place the wall bracket on the wall
and mark the 4 mounting holes in
accordance with the dimensions
shown in figure 4. Miminum installation
height is shown.
- fix the wall bracket with at least 4
screws (Ø 5.5 max) ensuring the
bracket is in the right orientation and
at the correct installation height.
NOTA 1 :
be sure to respect the
distances reported in figure 4.
NOTA 2 : The device must be fixed to
its support, the use of adhesif to fix the
support or the device is forbidden.
Heater installation:
- To mount the unit on the wall bracket,
engage the lower legs into the slots at
the bottom and back of the heater. This
operation is facilitated by presenting the
unit slightly tilted forward.
- Clip the top of the wall bracket.
Fig. 5
Appareil : 670 x 340
(26
3/8
’’ x 13
3/8
’’)
468
(18
7/16
’’)
380
(15 ’
’)
200
(8’’)
140
(5 1/2 ’’)
105
(4 1/8 ’’)
Distances en mm
3
00
(1
1
13/16
’’)
686
(27
’’)
178
(7’’)
Entrée de câble
Ne pas
obstruer
cette zone
Device :
26
3/8
’’ x 13
3/8
’’
(670 x 340 mm)
18’
’
(468 mm)
15
’’
(380 mm)
8’’
(200 mm)
5
1/2
’’
(140 mm)
4
1/8
’’
(105 mm)
Distances en mm
11
13/16
’’
(300 mm)
27’
’
(686 mm)
7’’
(178’’)
Cable entrance
Do not
obstruct
this zone
Fig. 4