Convaid Trekker Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 48

background image

This warranty gives the user specific legal rights and the user may have other rights that vary from state to state.
Warranty applicable in USA only, may vary in other countries.

FAST FACTORY SERVICE:

If being without the chair creates a hardship, the user may wish to take advantage

of our Fast Factory Service, whether under warranty or not.

WARRANTY REPAIR:

Simply send the chair to Convaid by UPS (prepaid). It will be

fixed and shipped out within 48 hours by UPS at Convaid’s expense.

NON-WARRANTY REPAIR:

The time to repair and ship the chair back to the user will be extended by the

length of time it takes to reach the user for approval of estimated repair costs.

Limited Warranty

Convaid warrants to the original retail purchaser of the Convaid product, that if any part thereof
proves functionally defective in material or workmanship within the specified warranty period,
such defective part will be repaired or replaced (at Convaid’s discretion) free of charge.
Warranty service may be
performed by Convaid service center or (at Convaid’s discretion) the factory.

Warranty Period

Frame .....................................................Lifetime of original retail buyer
Other components ...................................One year
Fabric & webbing.....................................One year

This warranty does not cover normal wear and tear or damage caused by accident or misuse.

To exercise this limited warranty, the user should first obtain a Return Authorization
Number from Convaid’s customer service. The product must be delivered charges pre-paid
(UPS recommended) to the factory or to an authorized service center, together with a copy of the
original invoice, the Return Authorization Number and a written description of the problem.

THIS LIMITED WARRANTY EXCLUDES ANY CLAIM FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
ANY IMPLIED WARRANTY APPLICABLE IS LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITA-
TIONS OR EXCLUSIONS MAY NOT APPLY TO THE USER. THERE ARE NO WARRANTIES WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE THEREOF.

2830 California Street, Torrance, CA 90503

Toll free in the US: 1-888-CONVAID (266-8243) • Phone: (310) 618-0111 • Fax: (310) 618-8811

Email: [email protected] • International Email: [email protected]

www.convaid.com

UG0018-ENG-12142015 Printed in USA

«
...
46
47
48

Содержание Trekker

















































Отзывы:

Нет отзывов

Похожие инструкции для Trekker

Бренд: Facility Explorer Страницы: 4

Бренд: Tapeswitch Страницы: 13

Бренд: Panasonic Страницы: 31

Бренд: Panasonic Страницы: 31

Бренд: NAiS Страницы: 199

Бренд: Panasonic Страницы: 38

Бренд: Panasonic Страницы: 36

Бренд: Panasonic Страницы: 179

Бренд: Panasonic Страницы: 23

Бренд: Jeep Страницы: 32

Бренд: Accel Страницы: 8

Бренд: Lawler Страницы: 4

Бренд: QTP Страницы: 2

SensoTimer ST6 Duo eco!ogic

Бренд: Kärcher Страницы: 96

Бренд: Case IH Страницы: 81

Бренд: Danfoss Страницы: 36

Бренд: Srne Страницы: 13

Бренд: Danfoss Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды