Convaid Trekker Скачать руководство пользователя страница 44

Страница: 44 / 48

CONVAI D U SER’S G U I DE

Cleaning and disinfection

Clean all areas that come in contact with user or caregiver with a disinfectant solution.

To prevent the spread of germs, disinfectant wipes should be used on a regular basis. Keep

frame dry and apply a non-toxic, hypoallergenic and biodegradable lubricant to all moving

parts. After longer storage periods, and before further use, the entire chair needs to be ser-

viced, cleaned, and disinfected.

Cleaning of frame:

Frame is to be kept dry and free of dirt and should be wiped off with a non-toxic, hypoaller-

genic and biodegradable wipe. Lubricant should be applied to moving parts as needed to

maintain easy folding and adjustment.

All contact with salt water should be avoided. If the chair is used in salt-water environments,

corrosion may occur. In the event of salt-water exposure, the frame should be wiped off with

a moist towel as soon as possible. Water and a soft cloth are sufficient. Lubricant should be

reapplied to all moving parts.

MAINTENANCE CHART

Weekly

Every 3

months

Every 6

months

As necessary

Rims, tires and tire pressure

•

Wheel locks and hand brakes

•

Accessories

•

Front and rear wheel axles

•

Cleaning & lubricating all moving parts****

•

Belts, zippers and Velcro closures

•

Seat/back upholstery**/tautness

•

Armrests & foam

•

Frame

•

Contacting a Convaid Dealer
for service or repair***

•

Use a non-toxic, hypoallergenic lubricant for all moving parts of the frame

Follow cleaning instructions for appropriate user hygiene

***

NOTE:

Repair or replacement of non-removable, worn or broken parts must be
performed by a qualified service facility.

****

NOTE:

Do NOT use WD-40 or other silicone based spray as a lubricant.

Содержание Trekker

















































Результаты поиска

Содержание Trekker

Отзывы:

Похожие инструкции для Trekker

Бренды по названию

Популярные бренды

Convaid Trekker, Руководство пользователя

Результаты поиска

Содержание Trekker

Отзывы:

Похожие инструкции для Trekker

Бренды по названию

Популярные бренды