Convaid Trekker Скачать руководство пользователя страница 46

Страница: 46 / 48

CONVAI D U SER’S G U I DE

Repairs

User:

The user can replace easily removable parts or accessories, e.g. foot supports, heel

loops, all fabric items, hand grips, etc.

Manufacturer/Service Facility:

Repair or replacement of permanently attached, worn

or broken parts must be performed by a qualified service facility. Any individual part of the

chair can be replaced. Contact the manufacturer/service facility for needed repairs. The

chair should be packaged in the original or suitable shipping carton for return to the manu-

facturer/service facility. Ship via UPS.

Tools Required

User:

• 3⁄8”, 7⁄16”, 3⁄8” or 2 adjustable wrenches with 3⁄4” capacity, Phillips head screwdriver
• 5/32” Allen wrench (included)

Spare Parts

If you need any spare parts for your chair, please visit or call your Convaid Service Dealer

you purchased this chair from or Convaid Customer Service Representative at 888-

Convaid (+1-310-618-0111) [email protected]. If the part is not under warranty,

you will receive an estimate of the cost and, if necessary, shipping instructions for the

return of the chair for repairs.

Functional Tests

All four wheels should make contact with the floor. With the chair empty, push it forward on

a smooth level surface- with enough momentum to travel six feet (2 m). The chair should

not veer to the left or right more than six inches (15 cm). Wheels should be free running.

Following the fold/unfold instructions, the chair should fold/unfold smoothly without undue

effort. All fasteners should be secure. Fasteners on moving joints should not be over tight.

Seat fabric should not be wide-stretched or sagging. Positioning accessories should be

correctly adjusted and secure.

Convaid Service Dealer

Please record the Convaid Dealer from which you purchased your chair:

Company:_____________________________________________________

Address:______________________________________________________

Phone:_________________________Website:______________________
Contact:_______________________Email:_________________________

Serial #:______________________________________________________

Or contact Convaid Customer Service at 888-Convaid (+1-310-618-0111)

or [email protected]

Содержание Trekker

















































Результаты поиска

Содержание Trekker

Отзывы:

Похожие инструкции для Trekker

Бренды по названию

Популярные бренды

Convaid Trekker, Руководство пользователя

Результаты поиска

Содержание Trekker

Отзывы:

Похожие инструкции для Trekker

Бренды по названию

Популярные бренды