Contura C 26K Low Скачать руководство пользователя страница 3

GB

67

List of Contents 

Technical details 

 

68

Supply of combustion air 

 

69

Connection to chimney 

 

70

Installation distances 

 

71

Installation of C26K Low 

 

72

Final installation and joining 

 

78

A warm welcome to Contura.

A warm welcome to the Contura family. We hope you 
will get a great deal of pleasure from your new stove. 
As a new owner of a Contura stove, you have secured 
a product with timeless design and long service life. 
Contura also has a combustion process that is both 
environmentally friendly and efficient, for the best heat 
production.

Read through these installation instructions carefully 
before installation. Read how to best light your stove 
in the lighting instructions.

The stove becomes very hot

During operation, certain surfaces of the stove become 
very hot and can cause burn injuries if touched. Also, take 
heed of the strong heat radiated through the door glass. 
Placing flammable material closer than the safe distance 
indicated may cause a fire. Smoulder combustion can cause 
quick gas ignition with the risk of damage to property and 
personal injury. 

NOTE! 

WARNING!   

Report the installation of a stove to your 
local authority.

The owner of the house is personally responsible 
for ensuring compliance with the mandatory safety 
requirements and must have the installation approved by 
a qualified inspector. Your local chimney sweep must also 
be informed about the installation, as this will affect the 
routines for regular chimney-sweeping services.

CONTENTS

Содержание C 26K Low

















Отзывы: