CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 3 -
Throttle Settings
The following
bolded
settings are required for manual operation in the Throttle Configuration
menu.
Throttle Configuration
Throttle Type Selection (Default = TSC Vernier)
TSC Mode Selection (Default = Primary)
TSC Min Speed Selection (Default = 650 RPM)
TSC Max Speed Selection (Default = 2400 RPM)
TSC Bump Speed (Default = 20 RPM)
TSC Ramp Rate Selection (Default = 100 RPM/Sec)
Throttle Curve Selection (Default = Linear)
Multistate Speed 1 Selection (Default = 650 RPM)
Multistate Speed 2 Selection (Default = 650 RPM)
Multistate Speed 3 Selection (Default = 650 RPM)
Multistate Speed 4 Selection (Default = 650 RPM)
Manual Throttle Options
1)
Vernier Throttle
Vernier throttle is standard up and down throttle between the minimum and maximum
selections. The ramp rate is the rate of acceleration in rpm’s per second. The control panel uses
J1939 throttle, also called “torque speed control” or TSC1.
2)
Multistate Throttle
Multistate throttle provides for one, two, three or four specific operating speeds. Pressing the up
and down buttons adjusts engine speed between the selected multistate speed selections.
3)
High/Low
Engine accelerates to the Max speed setting with the UP button is pressed. When the UP button
is released, the engine goes back to idle speed.
