CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 10 -
Analog 1 Function Options
1)
Fuel Level S-W – Fuel amount, in percentage, can be measured and displayed using a
standard Stewart Warner scale sender of 240 ohms – 33 ohms. 240 = Empty and 33 = Full.
Sender ground must be common with battery negative.
2)
Fuel Level VDO – Fuel amount, in percentage can be measured and displayed using a VDO
scale sender of 10 ohms – 180 ohms. 10 = Empty and 180 = Full. Sender ground must be
common with battery negative.
3)
Oil Pressure SW 100 PSI – Oil pressure, in PSI, can be measured and displayed using a
standard Stewart Warner scale sender of 240 ohms – 33 ohms. 240 = 0 PSI and 33 = 100 PSI.
Sender ground must be common with battery negative.
4)
Oil Pressure SW 125 PSI – Oil pressure, in PSI, can be measured and displayed using a
standard Stewart Warner scale sender of 240 ohms – 33 ohms. 240 = 0 PSI and 33 = 125 PSI.
Sender ground must be common with battery negative.
5)
Oil Pressure SW bar – Oil pressure, in bar, can be measured and displayed using a standard
Stewart Warner scale sender of 240 ohms – 33 ohms. 240 = 0 bar and 33 = 7 bar. Sender
ground must be common with battery negative.
6)
Oil Pressure VDO PSI – Oil pressure, in PSI, can be measured and displayed using a standard
VDO scale sender of 10 ohms – 180 ohms. 10 = 0 PSI and 180 = 150 PSI. Sender ground
must be common with battery negative.
7)
Oil Pressure VDO bar – Oil pressure, in bar, can be measured and displayed using a standard
VDO scale sender of 10 ohms – 180 ohms. 10 = 0 bar and 180 = 7 bar. Sender ground must
be common with battery negative.
8)
Switch – This setting allows for a switch to be connected rather than an analog sender. Set
Analog 1 Message to assign a label to the switch device.
9)
None – Set to None when no functionality is required.
