CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
9
CONTROL PANEL ANALOG AND DIGITAL INPUTS
The panel has three digital input (close to ground) available to monitor other components, senders
or signals. These inputs can be used for a number of purposes including alarms and shut downs.
Input
Heading
Default
Options
Connector
Pin
Digital 1
Normally
Open
Open / Closed
B
1
Function
E-Stop
Message
None
Check
Always
Off / Always / Run
Digital 1
Normally
Open
Open / Closed
B
3
Function
Throttle Up
Message
None
Check
Always
Off / Always / Run
Digital 1
Normally
Open
Open / Closed
B
4
Function
Throttle Down
Message
None
Check
Always
Off / Always / Run
Digital Function Activation
1) Off / Always / Run
– Describes when the parameter will be monitored for alarm conditions.
Run refers to when the engine is running. Off disables the alarm conditions. Always enables
the alarm constantly regardless of engine state.
2) Alarm Delay
– The time period, after Sender Check Bypass, that the parameter must be on
the alarm condition before the alarm becomes latched.
CONTROL PANEL OUTPUTS
The panel has three outputs available to signal other devices based on predefined events. These
Outputs can be used for a number of purposes including engine operation or driving an audible
alarm.
Input
Heading
Default
Connector
Pin
Relay 1
B
2
Function
Fuel Run
Polarity
Positive
Initial State On
Input
Heading
Default
Connector
Pin
Relay 2
B
5
Function
None
Polarity
Positive
Initial State Off
Input
Heading
Default
Connector
Pin
Relay 3
B
6
Function
None
Polarity
Positive
Initial State Off
