CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 10 -
ENGINE PARAMETERS
CAN Bus Communication
This module communicates to the engine ECU via the J1939 CAN Bus network. This is a two wire
connection to the engine ECU. Engine information and alarm codes are broadcast over the CAN bus
from the engine ECU to the controller display. And, the controller communicates throttle
commands to the engine ECU over the CAN bus.
Engine Parameter Viewing
The module has an Engine Parameters viewing menu where the operator may observe the current
conditions of the engine as reported by the engine ECU. The available parameters are listed below
and can be found in the viewing menus.
Engine Parameters
Total Hours
Requested TSC
Load at RPM
Engine Torque
Coolant Temp
Fuel Rate
Manifold Temperature
Potential Voltage
