4
Available Generator Information
Additional generator information is available via the
Generator Parameters menu
.
Total Reactive Power
Power Factor
Total Apparent Power
Power Factor Phase (Lead or Lag)
Generated Power (Total kWH)
Sleep Mode
To minimize current draw, the panel goes into a sleep mode two minutes after being set in auto
mode. In sleep mode, the display goes blank and the red lamp blinks once every ten seconds. The
engine ECU is also turned off.
Upon receiving a signal from the remote start input, the panel wakes up, the display turns back on
and normal operation commences.
Pushing any of the four buttons wakes up the panel and turns the display on. It will return to sleep
mode after a two minute period.
Sleep Mode
Red Lamp Blinks
Every Ten Seconds
Display is Blank
