42
CAN CONFIGURATION
This menu is used to define how and what messages are transmitted on the J1939 CAN Bus.
Destination and broad cast addresses are defined here. Most CAN addresses will be programmed
based on the engine manufacturer selection automatically. However, you can overwrite the defaults if
desired. If you are connecting to a CAN based, telematics radio, you may want to enable the
transmission of parameters not being broadcast by the ECU and how and when the module will
transmit. Contact CI application engineers for assistance.
MAINTENANCE CONFIGURATION
If you would like to set up service intervals for your equipment, use this menu to establish up to three
unique service schedules. You can set the time between, name of service, and when to being warning
of impending service requirements.
EMISSION CONFIGURATION
If your engine is equipped with emission components, you may use this menu to setup additional
warnings, enable and disable regen options and other CAN based messaging. Consult with a CI
application engineer if there are questions on its use.
