12
MANUAL STARTING
RUN KEY
Press the green RUN key. If a preheat cycle is programmed in the display, or requested by the
engine’s ECU, the status line will indicate a Wait to Start message or Preheat Countdown. Once
completed, the status line will show Ready to Start.
Press and Hold the green RUN key. The status line will display Starting Engine. The module will
energize the crank relay or send the J1939 CAN Start Engine command depending on the engine
manufacturer selected.
KEY SWITCH OPTION
An optional key switch with a crank position can be used if desired to start the engine. CI panel
options typically use the Key Switch option. Contact CI for further details.
