CONTROLS, INCORPORATED
C O N T R O L S Y S T E M S & S O L U T I O N S
- 12 -
CONFIGURATION MENUS
(1)
Input Configuration
Digital Input 1 - Setup (NO/NC, Action, Message, When Active, Delay)
(2)
Output Configuration
Relay Output 1 Setup (Function, Polarity, Initial State)
Relay Output 2 - Pre Set to Fuel/Run
Relay Output 3 - Pre Set to Preheat
Relay Output 4 Setup - Pre Set to Crank Signal
(3)
Throttle Configuration
Throttle Type - Throttle Type Selection (Default = Off)
(4)
Engine Safety Configuration
Sender Check Bypass Time Period Selection
Fuel Sender Type
Fuel Level Check (Off / Always / Run)
Low Fuel Level Pre-Alarm % Selection
Low Fuel Level Alarm % Selection
Fuel Alarm Time Delay Selection
Oil Pressure Check On/Off Selection
Low Oil Pressure Pre Alarm % Selection
Low Oil Pressure Alarm % Selection
Oil Pressure Alarm Time Delay Selection
Engine Temperature Check On/Off
Engine Temperature Pre Alarm Selection
Engine Temperature Alarm Selection
Engine Temperature Alarm Time Delay Selection
Battery Volt Check On/Off
Low Battery Volt Pre Alarm Selection
High Battery Volt Pre Alarm Selection
Battery Volt Trim Setting
Over Speed Alarm On/Off
Over Speed Alarm RPM Setting
Over Speed Alarm Time Delay Selection
(5)
Module Configuration
Preheat M:S (Default 0:00)
Hour Meter
Clear Operation Log Yes/No
Clear Alarm Log Yes/No
