Control M6004, Инструкция по эксплуатации

Страница: 25 / 34

24
Pre-comfort Recovery
• This thermostat is equipped with a 'Pre-Comfort Recovery' system that will activate the heating or cooling in advance
of the actual set program time, so that the room will be at the desired temperature at the start of the program time.
• When the thermostat is in 'recovery', the OVERRIDE symbol will be flashing.
• It is normal for the system to be activated earlier than the actual set program time (up to one hour).
•The Pre-comfort Recovery can be disabled if desired. Please refer to Optional Settings.
Usage Monitor
• The thermostat tracks the system 'ON' time; the time the heating/cooling equipment is running In Schedule running
mode (right side of the LCD screen), the USAGEsymbol will appear. Press the button once to view USAGE TODAY.
Press the button again to view USAGE THIS WEEK.
- USAGE TODAY automatically resets itself daily at midnight.
- USAGE THIS WEEK automatically resets itself at midnight on Sunday.
- A new week begins Monday morning.
Filter change
• The FILTER CHANGE indicator will display on the LCD screen when the system 'ON' time (HEAT, COOL or
FAN) has accumulated to approximately 500 hours. It is an indication that the filter should be changed at this time.
• To reset the FILTER CHANGE counter, press and hold USAGE for 3 seconds until the buzzer beeps, this will bring
the counter back to zero.
Programming