Control M6004, Инструкция по эксплуатации

Страница: 24 / 34

23
Temporary OVERRIDE
This function will change the temperature temporarily, until the next program period starts.
Press UP or DOWN to set the desired temperature.
• The OVERRIDE symbol will display, indicating the the OVERRIDE function is active.
• Only the currently active mode (heat or cool) setting will be changed
• The thermostat has an automatic delay function to protect the heating and cooling systems from irregular on/off
sequences, so there may be a delay of several minutes before the override settings will activate the heating/cooling
system.
HOLD FUNCTION
The HOLD function will maintain a constant temperature, similar to a non-programmable manual thermostat.
It disables all program settings and new temperature will remain the same until the RUN SCHEDULE button is
pressed.
1. Press UP or DOWN buttons to override the current temperature setting.
The HOLD symbol will appear above the FOURTH button.
2. Press the button under the HOLD symbol to enable the hold function.
3. Press the RUN SCHEDULE button to disable the hold function.
Programming