manualshive.com logo in svg

Control M6001A, Инструкция по эксплуатации

Поделиться
Скачать
Control M6001A Скачать руководство пользователя страница 4

3

Warning and Safety Precautions

• Read this instruction manual thoroughly prior to the installation and the use of the thermostat.
• Follow all instructions in this manual.
• Keep this instruction manual for future reference.
• See page 6 for detailed installation precautions.
• Clean the thermostat only with a dry cloth.
• Do not operate this thermostat with wet hands.
• Do not block any ventilation openings of the thermostat.
• Do not expose this thermostat to dripping or splashing.
• Do not expose this thermostat to excess heat.
• Do not attempt to disassemble, repair or modify this thermostat.

Prior to Use

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE CANADIAN ELECTRICAL 
CODE. IT IS STRONGLY RECOMMENDED TO HAVE A CERTIFIED ELECTRICIAN ON SITE TO 
ENSURE THE SAFE INSTALLATION OF YOUR THERMOSTAT. 
IN QUEBEC, THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN.

The manufacturer assumes no responsibility for improper wiring - or any resulting damages.

Improper installation by a non-professional automatically voids the warranty.

Содержание M6001A



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды