Control Techniques UD53, Руководство пользователя

Страница: 20 / 34

UD53 User Guide
Issue code: 53nu3
16
6 Related Parameters
6.1 Introduction
The parameters listed in this chapter are used for programming and
monitoring the UD53. Refer to the
Unidrive User Guide
for programming
instructions.
Warning
Before attempting to adjust any parameters, refer to the
Warnings and Notes at the beginning of Chapter 3
Setting up
the Drive
in the
Unidrive User Guide
.
6.2 Programmable software
Key
Type of parameter
RO Read-only
RW Read–write
...
select
Select from two settings
... enable Make or allow a function to operate
... disable Stop or disallow a function from operating
... indicator The value can only be read
Limitations of use
S The new parameter-value is saved when the
AC
supply is
disconnected from the Drive.
P Protected parameter; the parameter cannot be used as the
destination parameter for a programmable input.
Range
Bi Variable parameter having bipolar value range.
Uni Variable parameter having unipolar value range.
Bit Bit parameter
Symbols
ð
Default value
ô
Range of values
~ Indicates a range of values
(in the case of bit parameters,
~
indicates or ).