Control Techniques Modbus TCP, Руководство пользователя

Страница: 9 / 20

Modbus TCP Module Device Configuration
5.4 Ethernet Device Configuration Tool
Use the Ethernet Device Configuration Tool to connect to the device if you do not know the
IP address, or if the subnet mask of the web server does not match.
To configure settings using the Ethernet Device Configuration Tool, the device must be
installed in a soft starter, control power must be available, and the device and PC must both
be connected to the Ethernet network.
The Ethernet Device Configuration Tool is available from your local supplier.
NOTE
If your PC has a firewall enabled, you must add the tool to the list of authorised
programs.
To configure the device using the Ethernet Device Configuration Tool:
1. Start the Ethernet Device Configuration Tool.
2. Click on Search Devices. The software will search for connected devices.
3. To set a static IP address, click Configure then select Set IP address.
User Manual 7