Control Techniques Modbus TCP, Руководство пользователя

Страница: 8 / 20

Device Configuration Modbus TCP Module
5.3 On-board Web Server
To configure settings using the on-board web server, the device must be installed on a soft
starter, control power must be available, and the device and computer must be connected
to each other or to the same Ethernet network.
To configure the device using the on-board web server:
1. Start a browser on the PC and enter the device address, followed by /ipconfig.
The default address for a new Modbus TCP Module is 192.168.0.1.
2. Edit the settings as required. Click "Submit" to save the new settings. To store the
settings permanently in the device, tick "Static".
3. If prompted to enter a username and password:
username: admin
password: admin
NOTE
If you change the IP address and lose your record of it, use the Ethernet Device
Configuration Tool to scan the network and identify the module.
NOTE
If you change the subnet mask, the web server will not be able to communicate
with the device after the new settings are saved.
6