Declaration of Conformity
Control Techniques
The Gro
Newtown
Powys
UK
SY16 3BE
The servo drive product M'Ax, model numbers as listed above, has been designed and manufactured in accordance with the
following European harmonised, national and international standards:
These products comply with the Low Voltage Directive 73/23/EEC and the CE Marking Directive
93/68/EEC.
This electronic Drive product is intended to be used with an appropriate motor, controller,
electrical protection components and other equipment to form a complete end product or
system. It must only be installed by a professional assembler who is familiar with
requirements for safety and electromagnetic compatibility ("EMC"). The assembler is
responsible for ensuring that the end product or system complies with all the relevant laws in
the country where it is to be used. Refer to the product manual or EMC data sheet for further
information on EMC standards complied with by the product, and guidelines for installation.
MAX403SL
MAX406SL
MAX409SL
MAX412SL
MAX403AN
MAX406AN
MAX409AN
MAX412AN
EN60249
Base materials for printed circuits
IEC326-1
Printed boards: general information for the specification writer
IEC326-5
Printed boards: specification for single- and double-sided printed boards with
plated-through holes
IEC326-6
Printed boards: specification for multilayer printed boards
IEC664-1
Insulation co-ordination for equipment within low-voltage systems: principles,
requirements and tests
EN60529
Degrees of protection provided by enclosures (IP code)
UL94
Flammability rating of plastic materials
UL508C
Standard for power conversion equipment
W. Drury
Executive VP Technology
Newtown
Date: 27 March 2001.
