Stopping the VFC400-WiFi
VFC400-WiFi User Guide
41
Stopping the VFC400-WiFi
You can configure a VFC400-WiFi so it can be stopped with the
START
/CLEAR/STOP
button. This feature is
useful when you take the logger out of a shipment and don’t want to falsify the statistics with readings taken
after the shipment completion. The stop function is enabled in the
tab during configuration.
When enabled, following will stop the unit:
Press and hold the
START
/CLEAR/STOP
button.
STOPPED
is
shown in addition to the
symbol.
Keep holding the button until the
symbol disappears,
then release the button within 2 seconds.
STOPPED
is shown permanently on the display and the logger
will no longer take readings.
The last recorded temperature is now no longer shown, but
minimum and maximum trip values remain.
The logger will
not
stop if you:
l
release the button before the
symbol disappears
l
keep holding the button after
STOPPED
remains
permanently on until the
symbol reappears
The VFC400-WiFi will now connect to LogTag
®
Online to
upload any outstanding temperature readings.
Once the logger has stopped, the last alarm status before the logger stopped will continue to be
indicated with a cross or a tick symbol on the display, but the audible alarm and the alarm LED will
turn off (see exception
).
