CONTROL SOLUTIONS CS Medical Systems CS6103, Инструкция для пациентов

Страница: 24 / 36

CS6103 Interferential Stimulator Patient Instruction Manual
Control Solutions LLC Page 24 of 36
Operating Instructions
The operating instructions for the Interferential Stimulator include:

Electrode preparation,

Attaching electrodes and treatments,

Modes of operation, and

After treatment care.
Preparing Electrodes
Review the information below before attaching the electrodes:

Use only the leads and electrodes provided with the unit by the manufacturer.

Prepare the skin as required before applying the electrodes. This includes:
-
Cleaning and thoroughly drying the skin.
-
Shaving may be necessary depending upon the density of hair.
Failure to provide for maximum current conduction efficiency could result in skin
irritation related to increase current at the electrode placement site.

Apply electrodes on clean, dry and unbroken skin only.

Ensure the entire surface of the electrode is in contact with the skin.
Careful maintenance of the electrodes is strongly encouraged. This includes the lead
wires as well as the pads. Worn cables and/or poor pads (or the wrong size pads) can
have a significant impact upon treatment results.
Using reusable electrodes for longer periods of time than recommended by the
electrode manufacturer could result in ineffective treatment or cause skin irritation.