(e) Open your browser, and enter “http://10.0.0.101/” in the address window. You should see a page with
the “Babel Buster BB2-6010” header shown above (or as applicable by model). From this point, you will
find help on each page in the web site contained within the product.
(f) When you click on any of the page tabs such as System Setup, you will be asked for a user name and
password. The default login is user name “system” with password “admin”. You can also log in as “root”
using password “buster”. You must log in as “root” if you will be changing the IP address.
(g) To can change the IP address of the gateway, go to the Network page under System :: Setup. The
following page should appear. Change the IP address, and subnet mask and gateway if applicable. Click
Change IP to save the changes. The process of programming this into Flash takes around half a minute.
The new IP address only takes effect following the next system restart or power cycle.
2. Connecting the Gateway for the First Time
file:///C:/AAA_CSI/Literature/2015 User Guides/BB2-6010-GW User G...
3 of 4
12/23/2015 9:29 AM
