its own checksum that covers the entire Ethernet transmission.
The process of translating RTU to TCP or vice versa is simply a matter of adding or subtracting TCP header
and RTU checksum. The only configuration required in this type of gateway is to create an association
between RTU slave addresses and TCP IP addresses.
1.3 Important Safety Notice
Proper system design is required for reliable and safe operation of distributed control systems
incorporating any Control Solutions product. It is extremely important for the user and system
designer to consider the effects of loss of power, loss of communications, and failure of
components in the design of any monitoring or control application. This is especially important
where the potential for property damage, personal injury, or loss of life may exist. By using
ANY Control Solutions, Inc., product, the user has agreed to assume all risk and responsibility
for proper system design as well as any consequence for improper system design.
1.4 Warranty
This software and documentation is provided “as is,” without warranty of any kind, either expressed
or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular
purpose. Control Solutions may make improvements and/or changes in this documentation or in the
product(s) and/or the program(s) described in this documentation at any time. This product could include
software bugs, technical inaccuracies, typographical errors, and the like. Changes are periodically made to
the information herein; these changes may be incorporated in new editions of the software.
1. Overview
file:///C:/AAA_CSI/Literature/2015 User Guides/BB2-6010-GW User G...
2 of 2
12/23/2015 9:28 AM
