Contrec 515 FA01, Руководство по эксплуатации

Страница: 84 / 98

Communications
74 515 FA01 - 29 August 2021
-------------------------------------------- <separation line>
Log No. Date & Time & Status
Variable
unit value <example: total as Accum only>
Variable unit value
etc.
-------------------------------------------- <separation line>
Log No. Date & Time & Status
Variable
unit value <example: total as Accum only>
Variable unit value
etc.
Custom Footer Lines
-------------------------------------------- <separation line>
Reports will print in the historical order, and for those logs that have no data
(e.g. unit was powered off at the time) the print will show “Data not
available”, i.e.
Log No. Date & Time & Status
Variable
unit value <example: total as Accum only>
Variable unit value
etc.
-------------------------------------------- <separation line>
Log No. Data Not Available
-------------------------------------------- <separation line>
Log No. Date & Time & Status
Variable
unit value <example: total as Accum only>
Variable unit value
etc.
If the unit is programmed for 0 logs for a particular time base then the report
for that time base will only consist of the header and ID information and a
“Data Not Available” message. Likewise for the 0Hr to 23Hr report to print
the complete report there must be a minimum of 48 hourly logs programmed
otherwise “Data Not Available” will be printed for the missing logs.
Custom Header Lines
Title of Report
Current Date & Time
Instrument Serial No. & Tag
Data Not Available
Custom Footer Lines
-------------------------------------------- <separation line>