Contrec 515 BR03, Руководство по эксплуатации

Страница: 45 / 110

Operation
515 BR03 - 15 August 2021 35
Resetting a Batch
The instrument can be programmed to reset by different means.
•
After the end of a batch, the key can be pressed to step directly
to the HOLD.SET - TO RESET prompt in the main menu list. Holding
the SET key at this point will reset the batch total.
•
If Auto Reset is enabled in the parameters section of calibration, the
batch total will automatically reset when the next delivery (batch) is
started.
Printing a Delivery Docket
If the print option has been enabled, a delivery docket can be printed by
different means. The print prompt can only be accessed or a printout
initiated if there is no delivery (batch) in progress.
•
If the AUTO PRINT feature has been Enabled in the TM/LOG menu, a
delivery docket will automatically be printed at the end of each batch at
the same time that the delivery is logged. End of batch occurs when a
batch ends normally or if a batch is manually ended.
•
The HOLD.SET - TO PRINT prompt in the main menu can be used to
initiate the printing of a delivery docket. The
key can be used to
scroll through the main menu items or the / key can be
used to step directly to the HOLD.SET - TO RESET prompt and then a
single press of the
key will step onto the print prompt. If an
original printout has already been printed, a subsequent delivery docket
will include the text “(DUPLICATE DOCKET)”.
•
Previous (logged) delivery transactions can be reprinted from within the
LOGGED DATA menu by scrolling to the desired DEL number, then
while holding the
key, press ( ) key to initiate a
reprint.
Logic Input Control
This instrument allows for remote operation via the logic inputs on the rear
terminals. The logic input have the following functions:
•
Logic Input 1 - Remote Run
•
Logic Input 2 - Remote Stop/Reset
•
Logic Input 3 - Permissive Input
•
Logic Input 4 - CAL Switch - In field access protection
The Remote Stop input can also be used to reset the batch total by holding
the logic input low for 2 seconds if the batch is already complete.
For connection details, refer to Logic Input Connection on page 14.
RESET
DISPLAY
RESET PRINT
DISPLAY
DISPLAY
RESET PRINT