manualshive.com logo in svg

Continental Refrigerator PC1000i, Руководство оператора, Страница: 64 / 65

Поделиться
Скачать
Continental Refrigerator PC1000i Скачать руководство пользователя страница 64

64

PC1000i Crimper – Operator Manual 

PC1000i Crimper with CrimpIQ™ Controller

PC1000i Warranty

Should you experience difficulty with any product or part and require technical support, first contact
Customer Service at 1-800-235-4625. This Continental branded crimper is manufactured especially for ContiTech  
and is covered by the manufacturer under the below warranty.

CustomCrimp® “No Nonsense” Warranty

All CustomCrimp® products are warranted to be free of defects in workmanship and materials for one year from the date of invoice. 
This warranty ends when the product becomes unusable for reasons other than defects in workmanship or material.

If any product or part manufactured by CustomCrimp® is found to be defective by CustomCrimp®, at its option CustomCrimp® will 
either repair or replace the defective part or product and return via ground transportation, freight prepaid.

This warranty does not cover any product or part which is worn out, abused, altered, used for a purpose other than for which it was 
intended or used in a manner which was inconsistent with any instructions regarding its use.

Electric motors are separately warranted by their manufacturer under the conditions stated in their separate warranty.

PC1000i Warranty

Содержание PC1000i


































































Отзывы:

Нет отзывов