28
PC1000i Crimper – Operator Manual
PC1000i Crimper with CrimpIQ™ Controller
Measuring a Crimp
The crimper will always prompt the user to measure the first crimp. The crimper uses this measurement to adjust the
crimper to correctly crimp the next crimps.
When prompted, enter the measured crimp diameter. Measurements can be entered in inches or mm (the cursor will be
placed in either field based on the preferred units of measure setup in the machine configuration).
Notes:
• If the crimp diameter measurement matches the current crimp target, the user can press the Crimped to Target button to
automatically enter the measurement with a single button press.
• If a value is incorrectly entered, simply press the clear button.
• Once the measurement has been entered, the Save button is enabled and saves the measured crimp diameter for quality
assurance reporting.
• A keyboard will pop up on the bottom of the screen to allow users to enter crimp diameter data.
• If calipers are connected to the crimper, measurements can automatically be transferred into the measurement field.
• The preferred units of measure are set up per user and can be configured in the machine settings.
Crimp Operations