30
PC1000i Crimper – Operator Manual
PC1000i Crimper with CrimpIQ™ Controller
Operational Information
Die Name:
The name of the die that is currently installed in the machine.
Target Diameter:
The diameter the machine is set to crimp to.
Current Position:
Current die opening in inches and millimeters.
Last 10 Diameters:
A list of the last 10 crimp diameters
measured/entered into the CrimpIQ™ controller.
Last 10 Pressures:
The last 10 maximum crimping
pressures measured in PSI.
Note:
Users may not be required to measure every crimp.
Combined View:
This view combines the measurement and the max pressure view into one.
Crimp Detail Panel
This area of the screen provides the user with additional information about the crimping processes. The data in this area
rotates through a series of screens with different information. Users can cycle through each view with the icon in the
lower right section of this screen area.
Cycle Through Views
Note:
The most recent is noted with a “*”
Note:
The most recent is noted with a “*”
Crimp Operations