17
easy
ELECTRONIC CONTROL FOR REFRIGERATORS, FREEZERS AND WARMERS
OPERATIONS MANUAL
HOW TO ACTIVATE EZY SET PARAMETERS/RESTORE FACTORY SETTINGS
This is used to activate other preprogrammed parameter settings.
TABLE OF PREPROGRAMMED PARAMETER SETTINGS
1. Press and HOLD the “SET” button until “PS” appears flashing
in the display. RELEASE the “SET” button.
2. Press and RELEASE the “SET” button. “0” will be in the display.
3. Press the “UP” button until “22” appears. This is the password.
RELEASE the “UP” button.
4. Press and RELEASE the “SET” button.
“PS” will appear in the display.
5. Press and RELEASE the “DOWN” button. “EZY” will appear
in the display.
6. Press and RELEASE the “SET” button. The current EZY set
will appear in the display.
7. Press the “UP” button until EZY SET required is in the display
(see table above). Here “2” was chosen: this is the Celsius
setting for the low and medium temperature controller.
8. Press and HOLD the “SET” button for 5 seconds.
RELEASE the “SET” button. The control will now operate
with the new parameter settings. In this case, the controller
will now operate in degrees Celsius.
NOTE: EZY SET 1 WILL RESTORE THE ORIGINAL FACTORY SETTINGS IN ALL CONTROLLERS.
MEDIUM TEMP: COEA21K
SELF CONTAINED CONTROL
LOW TEMP: C8IA41
SPLIT CONTROL
SET 1
RESTORE FACTORY SETTINGS
RESTORE FACTORY SETTINGS
SET 2
3.4°C MEDIUM TEMP FAN PULSING
-17.8°C LOW TEMP FAN PULSING
SET 3
55°F WINE REFRIG FAN PULSING
-15°F LOW TEMP FAN PULSING
SET 4
38°F FAN CONSTANT
0°F FAN CONSTANT
NOTE: PULSING MEANS FANS ON FOR 1 MIN. AND OFF FOR 3 MIN. THIS CYCLE CONTINUES FOR THE WHOLE OFF CYCLE.
