Continental Fireplaces CVF42N, Инструкция по установке и эксплуатации

Страница: 16 / 32

16
W415-0380 / E / 08.31.12
PHAZER
TM
logs and glowing embers, exclusive to Continental Appliances, provide a unique and realistic
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
maximum glowing effect. Log colours
may vary. During the initial use of the appliance, the colours will become
more uniform as colour pigments burn in during the heat activated curing process.
D. Place the bottom of the left crossover log 4
against the left tab of the log support and
against the grate. Place the top of log
4
into the pocket provided on the back log 1
Position the notch located on the end of the
center log
5 against the centre grate post
with the other end of the log resting in the
pocket of log
4 .
4
5
6
E. Place the bottom of the right crossover log
6 against the right tab of the log support
and against the grate. Place the top into the
pocket provided on log
5 and allow to rest
against the bracket of the log support.
REAR LOG SUPPORT
LEFT TAB REAR TABS RIGHT TAB
REAR TABS
1
A. Prepare for log placement by ensuring the
left, rear, and right tabs of the log support and
fi rebox bottom are bent up to 90º, to aid in
locating the logs.
B. Place the back log
1
onto the base of the fi re-
box. Ensure that the back of the log rests against
the rear log support on the back wall of the fi re-
box, and behind the two rear tabs on the fi rebox
bottom.
2 3
C. Move the two small logs 2 & 3 into posi-
tion, place holes in the bottom of the logs
over the studs located on the burner.