Continental Fireplaces CDV70NT-2S, Инструкция по установке и эксплуатации

Страница: 33 / 104

33
W415-1104 / 05.07.12
!
WARNING
FAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USE
ONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTY
DAMAGE OR PERSONAL INJURY.
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
76.1A
Log colours may vary. During initial use of the appliance, the colours will become more uniform as colour
pigments burn in during the heat activated curing process.
Blocked burner ports can cause an incorrect fl ame pattern.
6.5 LOG PLACEMENT
1
2
A.
Centre the two charcoal strips, as shown,
along the inside front of the
fi rebox.
Place the rear log #1 onto the locating studs
along the back edge of the PHAZERAMIC
TM
burner.
B.
Position log #2 onto the locators on the
PHAZERAMIC
TM burner.