Continental Fireplaces Builder 42 Series Скачать руководство пользователя страница 51

Страница: 51 / 136

W415-3096 / C / 05.03.22

finishing

9.7 log placement

WARNING

48.3

• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved

with this appliance may result in property damage or personal injury.

• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since

appliance may not function properly and delayed ignition may occur.

• The logs are fragile and should be handled with care.

If applicable, insert the following statement:

“

PHAZER™

logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic

glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a

maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become

more uniform as colour pigments burn in during the heat-activated curing process.”

note:

Log numbers are located on the bottom or back of the logs.

IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-

BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).

IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.

Burner Overview

IF APPLICABLE, USE THIS BOX TO SHOW

“NATURAL GAS ONLY” LOG PLACEMENT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

IF SPACE IS LEFT OVER, USE THIS BOX TO

SHOW CORRECT FINAL LOG

PLACEMENT WITH PHOTOS.

IF NOT, USE BOXES AS ABOVE.

IF SPACE IS LEFT OVER, USE THIS BOX TO

SHOW CORRECT FINAL LOG PLACEMENT

WITH LINE DRAWINGS.

IF NOT, USE BOXES AS ABOVE.

Propane Models Only:

Natural Gas Models Only:

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

IF APPLICABLE, USE THIS BOX TO SHOW

“PROPANE ONLY” LOG PLACEMENT.

Insert only if

applicable ---->

Log Number

Part Number

Description

1
2
3
4
5
6
7
8
9

WARNING

48.3

• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved

with this appliance may result in property damage or personal injury.

• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since

appliance may not function properly and delayed ignition may occur.

• The logs are fragile and should be handled with care.

If applicable, insert the following statement:

“

PHAZER™

logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic

glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a

maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become

more uniform as colour pigments burn in during the heat-activated curing process.”

note:

Log numbers are located on the bottom or back of the logs.

IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-

BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).

IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.

Burner Overview

IF APPLICABLE, USE THIS BOX TO SHOW

“NATURAL GAS ONLY” LOG PLACEMENT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

IF SPACE IS LEFT OVER, USE THIS BOX TO

SHOW CORRECT FINAL LOG

PLACEMENT WITH PHOTOS.

IF NOT, USE BOXES AS ABOVE.

IF SPACE IS LEFT OVER, USE THIS BOX TO

SHOW CORRECT FINAL LOG PLACEMENT

WITH LINE DRAWINGS.

IF NOT, USE BOXES AS ABOVE.

Propane Models Only:

Natural Gas Models Only:

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

PLACE TEXT BOX HERE.

NOTE:

ENSURE NOMENCLATURE IS

CONSISTENT THROUGHOUT.

IF APPLICABLE, USE THIS BOX TO SHOW

“PROPANE ONLY” LOG PLACEMENT.

Insert only if

applicable ---->

Log Number

Part Number

Description

1
2
3
4
5
6
7
8
9

PHAZER™

log and glowing embers, exclusive to Continental, provide a unique and realistic glowing effect that is differ-

ent in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log colours

may vary. During the initial use of the appliance, the colours will become more uniform as colour pigments burn in during

the heat-activated curing process.

Pilot

Shield

Burner

Ports

Stud

(Log #1)

Stud

(Log #1)

Studs

(Log #2)

Studs

(Log #3)

Floor of

Firebox

Содержание Builder 42 Series









































































































































Результаты поиска

Содержание Builder 42 Series

Отзывы:

Похожие инструкции для Builder 42 Series

Бренды по названию

Популярные бренды

Continental Fireplaces Builder 42 Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Builder 42 Series

Отзывы:

Похожие инструкции для Builder 42 Series

Бренды по названию

Популярные бренды