46
W415-1364 / 12.08.14
EN
9.3 RECEPTACLE WIRING DIAGRAM
10.0 OPERATION
10.1 LIGHT OPERATION
To operate the lights locate the ON/OFF switch on the wall.
A.
Turning the light switch into the ON position will begin the light operation, the colour of this light when
first initiated will be white.
B.
To change the light colours turn the light switch into the OFF position and then into the ON position,
within a few seconds, this will begin the rolling colour sequence.
C.
If you desire to lock one of the colours from the rolling colour sequence turn the light switch into the
OFF position and then back into the ON position within three seconds, this will lock in that colour.
NOTE: After the colour has been locked, switching Off and ON will shart the cycle over with the white
colour. If the light is switched to the OFF position and then back to the ON position, the cycle will begin
again with the white colour. In order to reset this operation, at any time, turn the light switch to the OFF
position for a minimum of 10 seconds.
