Be very careful when you handle the blades or inserts. Be
especially careful when you remove them from machine,
their cutting edges are very sharp.
Care shall be taken when handling the sharp cutting blades,
emptying the bowl and during cleaning
Wait until moving parts stop running before you remove the
lid of machine.
Do not exceed the maximum content indicated on the
accessories.
Switch off the appliance and disconnect from supply before
changing accessories or approaching parts that move in use.
■
BEFORE CONNECTING TO POWER
Before connecting to the power, recheck the type of supply
and the mains voltage match with the details given on the
rating label on the appliance.
Using for the first time, rip off all wrapping paper and plastic
bags. Clean the fittings.
■
SAVE THESE INSTRUCTIONS
■
2 SPEED REGULATOR & PULSE SPEED
After settle down the parts you
need, If you want the food
processor move slowly, turn the
adjustment for “1” level.
If you need the food processor
move fast, turn the adjustment
for “2” level.
Use pulse switch for a faster
speed. Stop the pulse switch to stop the motor.
■
USING THE KNIFE BLADE
The 2 knife blades could be the most versatile of all the attachments.
For Stainless Steel Knife Blade:
▲
Before processing, cut the food into pusher size pieces.
▲
Operation cannot longer than 3 minutes every time.
Please rest machine 5 minutes before next operation.
It's better rest machine 30 minutes after 3 times' operations, this will
cool down motor and better protect machine life.
▲
For coarser foods use the pulse control.
Food
Processing size
Quantity
Processing time Speed
Onion
Into 4 pcs
Without skin
100g
approx. 20-40 sec.
Pulse
Garlic
Without skin
100g
approx. 30-60 sec.
Pulse
Carrot
< 2x2 cm
100g
approx. 30-60 sec.
Speed 2/
Pulse
Meat
< 2x2 cm without
bone
100g
approx. 20-40 sec.
Speed 2/
Pulse
For Plastic Knife Blade
：
▲
Operation cannot longer than 2 minutes every time.
Please rest machine 5 minutes before next operation.
It's better rest machine 30 minutes after 3 times' operations, this will
cool down motor and better protect machine life.
