15
III. INSTALLATION
A.
Unpacking
Your TV should be unpacked and handled by 2 people, to avoid any risk of deformation or impact on the
LED display.
Start by preparing a flat surface covered with a soft, thick fabric (a blanket, for example). The prepared
surface area must be larger than the size of the TV. This will allow the TV to be laid flat with the LED screen
facing the floor.
Before removing the TV from its packaging, read the sections "Wall Mounting" and "Stand Legs Installation"
to prepare yourself for the installation operation you have chosen.
Remove the TV from its packaging by lifting it vertically, then place the TV screen flat on the previously
protected flat surface so that either the stand legs or a wall mounting bracket (not included) can be
attached.
Packaging materials
-
The packaging cardboard is recyclable.
-
The materials marked with the symbol
are recycl
able.
-
>PE< = polyethylene; >PS< = polystyrene; >PP< = polypropylene; ... This means that they
can be recycled by disposing of them in appropriate collection containers.
-
Other packaging elements (adhesive, fasteners, etc.) should be disposed of with
household waste.
For more information: www.quefairedemesdechets.fr
B.
Wall mounting
Contact a professional for assistance with the wall mounting of your TV set. We cannot be held
liable for any damage or injury caused by the mounting of the TV set.
The TV must be mounted on a vertical wall. This TV is not intended for installation on a sloped
wall.
The TV must be turned off and disconnected from the power supply when you mount it to the
wall. Failure to comply with these precautions may result in electric shock or electrocution.
The mounting bracket must correspond to the centre distances indicated below.
NOTE
: The screws supplied are used for fixing the stand legs only. If you want to mount the TV on a wall,
contact a professional to find out how to install a wall bracket.
Rear view of your TV set
