EN-25
Installation location
1.
Ventilation conditions
The position you choose for the installation of the
freezer
must be
well ventilated and have as little hot air as possible. Do not place the
freezer
near a heat source such as a stove, boiler and avoid direct
sunlight, thus ensuring the cooling effect while saving energy
consumption. Do not place the
freezer
in a humid place, to prevent
the
freezer
from rusting and loss of electricity. The result of the total
space
of the room in which the
freezer
is installed divided by the
amount of
refrigerant charge of the
freezer
should not be less than
8 g / M 3.
Note: the amount of refrigerant charged for the
freezer
can be found
on
the rating plate.
2.
Heat dissipation space
When operating, the
freezer
releases heat to the environment.
Therefore, at least 300mm of free space should be maintained on the
top side, more than 100mm on both sides and more than 50mm on the
back of the
freezer
Dimensions in mm:
l
P
H
A
B
C(°)
E
F
544
641
1443
890
1096
125
50
100
Note: Figures 1 and 2 show only the product's demand for space.