
EN-24
IV.
INSTALLATION
IMPORTANT: The installation of this device requires the intervention of
2 people.
Location
When selecting a position for your freezer, you need to make sure that
the floor is flat and firm, and that the room is well ventilated with an
average room temperature between 10
℃
and 43
℃
. Avoid placing your
freezer near a heat source, such as a stove, boiler, or radiator. So
avoid direct sunlight on over-buildings or sunbeds. Make sure that the
freezer is not placed near humidity (dryer for example) otherwise
condensation will occur on the freezer cabinet. Never place the freezer
in a wall or built into built-in cabinets or furniture. When your freezer is
on, the grill on the back can get hot and the sides hot. Therefore, it
must be installed leaving at least 9 cm of free space behind and the
sides 5 cm.
Upgrade
If the freezer is not level, the door gasket and
magnetic alignment will be affected. Once the
freezer is placed in its final location, adjust
the adjustable feet at the front by turning
them.
Cleaning before first use
Wipe the inside of the freezer with a dilute solution of baking soda.
Then rinse with lukewarm water with a sponge or damp cloth. Wash
the trays and shelves. In hot soapy water and dry completely.