CONTINENTAL EDISON 38SD822V, Руководство по эксплуатации

Страница: 39 / 127

English - 38 -
LCD TV and Operating Buttons
FRONT and REAR VIEW SIDE VIEW Control Buttons
Up button 1.
Down button 2.
Programme/Volume / AV 3.
selection button
Standby / On button
4.
Note :You can use “ +/- ” buttons to
change volume. If you want to change
channels, press
P / V / AV button once
and then use “ +/- ” buttons. If you hold
the P / V / AV button about a few seconds,
source OSD will be displayed. Main
menu OSD cannot be displayed via
control buttons.
Viewing the Connections- Back Connectors
SCART socket inputs or outputs for external devices. 1.
Connect the SCART cable between SCART socket on TV and
SCART socket on your external device (such as a VCR or a DVD
player).
Note : If an external device is connected via the SCART socket,
the TV will automatically switch to AV mode.
PC Input is for connecting a personal computer to the TV set. 2.
Connect the PC cable between the PC-VGA INPUT on the TV
and the PC output on your PC. Component Video Inputs (YPbPr)
are used for connecting component video.
You can use PC-VGA input to enable YPbPr signal connection
with a device that has component output. Connect the YPbPr to PC cable between the PC INPUT on
the TV and the component video outputs of your device.
SPDIF Coaxial Out 3. outputs digital audio signals of the currently watched source. Dolby D Audio is
bypassed while in media browser mode only.
RF Input connects to an antenna or a cable system.
4.
Note that if you use a media recorder, you should connect the aerial cable through the device to the
television with an appropriate antenna cable, as shown in the illustration in the following pages.
5. HDMI 1 : HDMI 1 input
HDMI Input is for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High De
fi nition pictures from devices such as a High
De fi nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets
or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p
(Optional) signals. No sound connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (optional) with the LCD TV, we would de fi nitely recommend to plug all your cables into the
back of the LCD before mounting to the wall.
SPDIF
SCART
VGA
Coax.OUT
HDMI
1
02_MB46_[GB]_1205UK_IDTV_NICKEL15_16822W_10070078_50176292.indd 38 02_MB46_[GB]_1205UK_IDTV_NICKEL15_16822W_10070078_50176292.indd 38 06.10.2010 10:46:06 06.10.2010 10:46:06