Edition 05/2021 - MC ULTIMA- Technical documentation - page 20
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
9 PROGRAMMING DOSES METHODOLOGY
9.1
Coffee doses programming:
MENU
/
ENTER
-
+
Esc
2 ways of programming are possible to set the coffee dose.
Choose 1st group (on the left when the user is in front of the machine)
o
To program all groups at the same time with the same value.
o
The programmed key will have its equivalent key programmed identically on the other
groups
Choose each group separately, if they the groups need to have different value.
Methodology:
Put the ground coffee (1 dose or 2 doses according to the programmed key), in the suitable filter holder.
Press the “MENU” key: the display show “Coffee boiler T”
Press 2 times the “+” key: the display shows “Doses setting”
Press the “MENU” key: the display shows:
The button to be programmed are not lighting.
Press the key to be programmed to start the flow and press again when water quantity is correct.
The value is directly registered
The programmed key remains “On”
Then, keep programming the next key, and so on for the other keys.
Note: On the factory, each machine undergoes a test protocol on which a program has already been
completed, according to the following settings:
1 espresso = 2.5 cl / 2 espressos = 5 cl / 1 coffee = 4,5 cl / 2 coffee = 9 cl
Doses setting
XX s
YY ml
95°C
