Maintenance
49
Replacing the glass-plate
Tilt the glass plate back
At the end of each glass plate lever there is a small hook that rests on a
round pin. The hook holds the glass plate in place on the scanner
‟s chassis
while also letting you un-attach the glass plate from the scanner. You start
by tilting
the glass plate upwards on the round pin‟s axis.
1. With both arms, pull simultaneously on the left and right levers to tilt the
glass-plate towards your body
on the round pin‟s axis.
2. Tilt the glass plate back on the hooks until it is completely free of its
resting place on the scan area bed and you can access the glass pate
edges.
Lever knob
Hook rests on
round pin
Replacing the glass-plate
Lift the glass plate from the scanner bed
1. Tilt the glass back until the hooks become free of their pins.
2. Lift the glass plate from the scanner..
Lift the glass-plate from the scan
area bed
6
5
