PIX14
- 4x30W TRI COB LEDs lighting bar with LCD display
Page 5
English
4 - Description
1
Power input/output socket
Allows you to connect the projector to an electrical
outlet and to link several projectors together.
These are PowerCON Neutrik
®
sockets.
2
Main fuse
If need to replace the fuse, please make sure the
new fuse has exactly the same characteristics as the
original one.
3
Mini USB socket
Allows you to update the internal software.
Note : this update can only be performed by our
staff.
Do not connect any device to this plug. The update
requires a specific equipment.
4
Menu buttons
MODE button
Allows you to access menus and select a
function.
ENTER button
Allows you to configure the parameters of the
functions chosen with the MODE button.
UP and DOWN buttons
Allow you to increase/decrease the adjustable
values or browse the submenus.
5
DMX output
3-pin male XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3
6
DMX input
3-pin female XLR plug hardwired as follows :
- Mass: 1
- Negative signal: 2
- Positive signal: 3
7
Microphone
Used for music-sensitive programs.
8
Display
This intuitive display allows you to configure your
projector. Please refer to the next paragraphs for
more details about the projector configuration.
9
Hanging ring
Allows you to secure the projector with a safety
cable.
The legislation requires that every device set up in
a public space features a double fixation bracket.
This security system must hold 10 times the weight
of the device.
4
3
9
8
7
5
6
1
2
