English
IPZOOM3/7x15QC
-3/7 x 15W LEDs waterproof projectors with zoom
Page 5
4 - Internal menu
Menu
Sub-menu
UP and DOWN
Action
Menu
Set ADDR
Set Adress
XXX
Sets the DMX address. Values from 001 to 512.
Menu
UserMode
CH:
03/05/07/09
Allows you to determine the number of DMX channels used.
DMX modes:
-
3-channel mode
: Colours and Macros/Dimmer or speed/Zoom
-
5-channel mode
: Red/Green/Blue/White/Zoom
-
7-channel mode
: Red/Green/Blue/White/Dimmer/Shutter/Zoom
-
9-channel mode
: Red/Green/Blue/White/Dimmer/Shutter/Colours and
Macros/Speed/Zoom
Menu
Function
NO DMX
Close/Hold
Allows you to determine the behaviour of your projector in case of DMX signal
interruption:
Close
: The projector shuts off.
Hold
: The projector holds onto the last DMX instruction received.
LCD.Set
Backligh
XX
Allows you to turn off the backlight when the screen has
been inactive.
From 1 to 60 seconds.
Key Lock
ON/Off
Allows you to lock menu buttons.
Press the MODE button for 3 seconds to unlock them
again.
DisFlash
DisFlash
ON/OFF
Activates or diactivates display flashes in case of
absence of DMX signal
LOAD
ON/OFF
Resets back to factory settings.
TEMP
TEMP
Celsius
Display the temperature of your projector in Celsius.
TEMP
Fahren
Display the temperature of your projector in Fahrhenheit.
DimCurve
(Dimmer settings)
DimCurve
Standard
Rise and fall times are different for each mode.
Please refer to chapter 4.3 for more details about
dimmer curves.
DimCurve
Stage
DimCurve
TV
DimCurve
Architec
DimCurve
Theatre
Upon initialisation, the display will indicate:
Update
Wait ...
The projector will then check for available updates. It will then initialise, and the display will indicate:
IP ZOOM
3x15QC
ou
IP ZOOM
7x15QC
The projector is ready to be operated once both these steps are completed.
4.1 - Initialisation
4.2 - Menu tree
