Cyclone-120R
- 120W Spot moving head
Page 5
English
4 - Internal menu
MENU
UP and DOWN
Action
ENTER
DMX address selection
Press ENTER and select the adress with UP and DOWN
Saves
changes
1
channel : Select the pre-programmed sequences: 1 - 4
Press ENTER,
mode selection with UP and
DOWN.
Saves
changes
10
channels
A
: Pan, Tilt, Dimmer, Strobe, Colour wheel, Gobo
wheel, gobo rotation, Prism, Prism rotation, Functions
10
channels
B
(Cyclone 80 compatible) : Pan, Tilt, Dimmer,
Strobe, Colour wheel, Gobo wheel, Prism, Prism rotation,
Functions, gobo rotation
16
channels : Pan, Precise Pa,, Tilt, Precise Tilt,Movement
speed, Movement macros, VMovement macros speed,
Dimmer, Strobe, Colour wheel, Gobo wheel, Gobos rotation,
Prism, Prism rotation, Prism macros, Functions
Show 1 :
PAN = 180° / TILT = 100°
Shows are music-sensitive.
Please make sure the music-sensitive mode is activated
(Sound State menu), and the microphone configured
(Sound Sense menu).
Refer to paragraph 4.3 for more details about music-
sensitive shows.
Saves
changes
Show 2 :
PAN = 180° / TILT = 100°
Show 3 :
PAN = 540° / TILT = 180°
Show 4 :
PAN = 540° / TILT = 100°
The Split Color mode allows you to create half-colours and full colours.
Saves
changes
Determines how the device reacts in Slave mode :
- Slave 1 : The device replicates the Master device movements.
- Slave 2 : The device replicates in reverse the Master device movements.
Saves
changes
Activates or deactivates the Black out mode.
When ON is selected, the moving head automatically starts in black out mode when turned
on.
When Off is selected, the moving head automatically launches shows when turned on.
Press ENTER and select On or Off with the UP and DOWN buttons.
Saves
changes
Activates or deactivates the music-sensitive mode.
Press ENTER and select On or Off with the UP and DOWN buttons.
Saves
changes
4.1 - Menus and functions
Once turned on, the moving head will start a position initialisation for each motor. At this stage, the display indicates
.
Once the initilisation is over, the display will indicate
, you will then be able to access the menu using the MENU or ENTER buttons. If the
menu remains inactive for 30 seconds, the display will indicate
and locks. To access the menu again, press ENTER.
