Cyclone-120R
- 120W Spot moving head
Page 7
English
4.2 - Initial position settings
4.3 - Movement limitations
Show 1
Show 2
Show 3
Show 4
After initialising, the moving head is automatically positioned on its original positions.
You can configure this positions as it pleases you.
Enter the DMX Address menu, then press ENTER for more than 3 seconds. You are now accessing the initial position settings.
In order to avoid lighting effects over untargeted areas (such as ceilings, room angles, etc.) each show has its own PAN and TILT ranges.
80°
PAN
TILT
100°
PAN
TILT
180°
100°
PAN
TILT
540°
180°
PAN
TILT
540°
100°
PAN movement initial position settings.
TILT movement initial position settings.
Colour wheel movement initial position settings.
Gobo wheel movement initial position settings.
Rotating gobo initial position settings.
Prism initial position settings.
Prism rotation initial position settings.
